UL489 NDM3EU-225 - Bộ ngắt mạch vỏ đúc

Các chứng chỉ hiện có UL Tình trạng sẵn có tùy thuộc vào mẫu và cấu hình.

Tổng quan

The UL489 NDM3EU-225 is an electronic molded-case circuit breaker developed for North American low-voltage distribution systems. It combines overload long-delay, short-circuit short-delay and instantaneous protection in a compact frame.

UL489 NDM3EU-225 - Bộ ngắt mạch vỏ đúc

Ưu điểm của sản phẩm

Electronic ProtectionAdjustable electronic functions coordinate overload and short-circuit protection.
UL ComplianceCertification supports use in North American distribution equipment and panels.
Flexible SettingsFrame ratings and trip settings can be matched to the protected feeder.
Practical IntegrationFixed, rear plug-in and lug-terminal arrangements support different panel designs.

Thông số kỹ thuật tiêu biểu

Rated Insulation Voltage800 V
Điện áp định mứcAC 240 / 480 V
Frame CurrentUp to 225 A
Interrupting Capacity65 kA at AC 240 V; 35 kA at AC 480 V
Mechanical / Electrical Life4,000 / 4,000 operations
CertificationsUL 489, UL 486E, UL 1998

Chỉ là cấu hình tiêu biểu. Các thông số kỹ thuật cuối cùng sẽ được xác nhận dựa trên yêu cầu của dự án.

Ứng dụng

Suitable for industrial switchboards, distribution panels and commercial power systems requiring electronic protection and UL-certified equipment.

LAST: TIẾP THEO:

Các đề xuất liên quan

  • NDB6AZ-125H 5G DC miniature circuit breaker

    2025

    NDB6AZ-63H series products are mainly used in telecommunications equipment rooms or communication cabinets, as isolation, short circuit and overload protection for cabinets, equipment rooms or downstream subscriber lines.

    Xem chi tiết
  • SVM5H-250H MCCB 1000 VAC

    1870

    General SVM5H series of moulded case circuit breaker is supplied with rated insulating voltage 1150V and used for circuit of A.C. 50Hz, rated operating voltage AC 1140V. (or below), rated operating current up to 630A for infrequent changing over a...

    Xem chi tiết
  • NDQ3-125

    1815

    1. Applicable Scope and Purpose The NDQ3-125 P-grade ATSE are applicable for sites with the AC voltage below AC380V.AC400V.AC415V and the rated frequency of 50Hz. This product complies with the GB14048.1-2012 and GB/T14048.11-2016 standa...

    Xem chi tiết
  • NDC1(Z)-40 AC Contactor with AC or DC Coil

    2041

    NDC1(Z)-40 AC Contactor, which used in 50Hz(60Hz) AC circuit with the rated voltage of 1000V. It is used in AC-3 type, with the rated working voltage of 415V and rated working current of 40A, to realize distant connection and disconnection of the ...

    Xem chi tiết
Xem thêm!

Danh sách sản phẩm tham khảo
Danh sách sản phẩm tham khảo Gửi yêu cầu tư vấn về các sản phẩm trên